GPIB Controller for Hi-Speed USB

3

BUY ONLINE at ni.com or CALL 800 813 3693 (U.S.)

Specifications

USB Port

Hi-Speed USB signaling......................

480 Mb/s

IEEE 488 Compatibility

IEEE 488.1 and IEEE 488.2

IEEE 488 interlocked handshake.........

1.8 MB/s

IEEE 488 noninterlocked

handshake (HS488).........................

7.2 MB/s

1

Actual rates depend on system configuration, instrument capabilities, and USB port in use.

External Indicators

Ready

Green ..............................................

USB full-speed

Amber .............................................

Hi-Speed USB

Active

Green ..............................................

Device active

Power Requirement

USB bus-powered device

Maximum power consumption ...........

500 mA

Physical

Dimensions..........................................

10.7 by 6.6 by 2.6 cm

(4.2 by 2.6 by 1.0 in.)

I/O Connectors

GPIB ....................................................

IEEE 488 standard 24-pin

USB ....................................................

USB standard series A plug

Operating Environment

Temperature ........................................

0 to 55 °C

Relative humidity ................................

10 to 90%, noncondensing

Storage Environment

Temperature ........................................

-20 to 70 °C

Relative humidity ................................

5 to 95%, noncondensing

Safety and Compliance

Safety

This product is designed to meet the requirements of the following

standards of safety for electrical equipment for measurement, control,

and laboratory use:

• IEC 61010-1, EN 61010-1

• UL 61010-1, CSA 61010-1

Note: For UL and other safety certifications, refer to the product label or

click the appropriate link in the Certification column.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards

for electrical equipment for measurement, control, and laboratory use:

• EN 61326 (IEC 61326): Class A emissions; Basic immunity

• EN 55011 (CISPR 11): Group 1, Class A emissions

• AS/NZS CISPR 11: Group 1, Class A emissions

• FCC 47 CFR Part 15B: Class A emissions

• ICES-001: Class A emissions

CE Compliance

This product meets the essential requirements of applicable European

Directives, as amended for CE marking, as follows:

• 2006/95/EC; Low-Voltage Directive (safety)

• 2004/108/EC; Electromagnetic Compatibility Directive (EMC)

Note: Refer to the Declaration of Conformity (DoC) for this product for

any additional regulatory compliance information. To obtain the DoC for

product line, and click the appropriate link in the Certification column.

Waste Electrical and Electronic Equipment (WEEE)

EU Customers: At the end of their life cycle, all products must be

sent to a WEEE recycling center. For more information about WEEE

recycling centers and National Instruments WEEE initiatives,