ISL54213 datasheet(5/15 Pages) INTERSIL

5 / 15 page

FN6663.0

March 26, 2008

POWER SUPPLY CHARACTERISTICS

Power Supply Range, VDD

Full

2.5

5.0

Positive Supply Current, IDD

(Audio Mode)

VDD = 3.6V, IN = 0V, CTRL = 3.6V

µA

Full

µA

Positive Supply Current, IDD

(USB Mode)

VDD = 3.6V, IN = 3.6V, CTRL = 3.6V

4.5

µA

Full

5.5

µA

Positive Supply Current, IDD

(Mute State)

VDD = 3.6V, IN = 0V, CTRL = 0V

4.5

µA

Full

µA

Power OFF-current, IDx ICOMx VDD = 0V, VDx = VCOMx = 5.25V, IN = CTRL = Float

µA

DIGITAL INPUT CHARACTERISTICS

Voltage Low, VINL, VCTRLL

VDD = 2.7V to 3.6V

Full

0.5

Voltage High, VINH, VCTRLH

VDD = 2.7V to 3.6V

Full

1.4

Input Current, IINL, ICTRLL

VDD = 3.6V, IN = 0V, CTRL = 0V

Full

-50

Input Current, IINH

VDD = 3.6V, IN = 3.6, CTRL = 0V

Full

-2

1.1

µA

Input Current, ICTRLH

VDD = 3.6V, IN = 0V, CTRL = 3.6V

Full

-2

1.1

µA

CTRL Pull-Down Resistor,

RCTRL

VDD = 3.6V, IN = 0V, CTRL = 3.6V; measure current through the

internal pull-down resistor and calculate resistance value.

Full

IN Pull-Down Resistor, RIN

VDD = 3.6V, IN = 3.6V, CTRL = 3.6V; measure current through

the internal pull-down resistor and calculate resistance value.

Full

NOTES:

8. Vlogic = Input voltage to perform proper function.

9. The algebraic convention, whereby the most negative value is a minimum and the most positive a maximum, is used in this data sheet.

10. Parts are 100% tested at +25°C. Temperature limits established by characterization and are not production tested.

11. Flatness is defined as the difference between maximum and minimum value of on-resistance over the specified analog signal range.

12. Limits established by characterization and are not production tested.

13. rON matching between channels is calculated by subtracting the channel with the highest max rON value from the channel with lowest max rON

value, between L and R or between D+ and D-.

Electrical Specifications - 2.7V to 3.6V Supply

Test Conditions: VDD = +3.0V, GND = 0V, VINH = VCTRLH = 1.4V, VINL = VCTRLL = 0.5V,

(Note 8), Unless Otherwise Specified. (Continued)

PARAMETER

TEST CONDITIONS

TEMP

(°C)

MIN

(Notes 9, 10) TYP

MAX

(Notes 9, 10) UNITS

ISL54213

ISL54213 bảng dữ liệu(PDF) 5 Page - Intersil Corporation

ISL54213 bảng dữ liệu(HTML) 5 Page - Intersil Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

bảng dữ liệu tải về

Link URL