| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SC820 bảng dữ liệu(PDF) 1 Page - Semtech Corporation |
|
|
|||||||||||||||||||||||||||||
SC820 bảng dữ liệu(HTML) 1 Page - Semtech Corporation |
|
1 / 22 page ![]() © 2009 Semtech Corporation POWER MANAGEMENT 1 SC820 Adapter/USB Dual Input Single-cell Li-ion Charger Features Input voltage protection — 30V Adapter input automatically selected over USB Constant voltage — 4.2V, 1% regulation Charging by current and voltage regulation (CC/CV) Thermal limiting of charge current Programmable battery-dependent currents (adapter- sourced fast-charge & pre-charge, termination) Programmable source-limited currents (USB-sourced fast-charge & pre-charge) Current-limited adapter support — reduces power dis- sipation in charger IC USB input limits charge current — prevents Vbus overload Instantaneous CC-to-CV transition for faster charging Three termination options — float-charge, automatic re-charge, or forced re-charge to keep the battery topped-off after termination without float-charging Soft-start — reduces load transients High operating voltage range — permits use of unregulated adapters Complies with CCSA YD/T 1591-2006 Space saving 2×2×0.6 (mm) MLPD package Pb free, Halogen free, and RoHS/WEEE compliant Applications Mobile phones MP3 players GPS handheld receivers Description The SC820 is a dual input (adapter/USB) linear single-cell Li-ion battery charger in an 8 lead 2×2mm MLPD ultra-thin package. Both inputs will survive sustained input voltage up to 30V to protect against hot plug overshoot and faulty charging adapters. Charging begins automatically when a valid input source is applied to either input. The adapter input is selected when both input sources are present. Thermal limiting protects the SC820 from excessive power dissipation when charging from either source. The SC820 can be programmed to turn off when charging is complete or to continue operating as an LDO regulator while float- charging the battery. The adapter input charges with an adapter operating in voltage regulation or in current limit to obtain the lowest possible power dissipation by pulling the VAD input voltage down to the battery voltage. The VUSB input dynamically limits load current to automatically prevent over-loading the USB Vbus supply. Charge current programming requires two resistors. One determines battery-capacity dependent currents: adapter input fast-charge current, pre-charge current, and charge termination current. The other independently determines input-limited USB charging currents: USB input fast- charge and pre-charge current. Device Load Battery Pack 2.2 μF USB Vbus 2.2 μF VADAPTER 2.2 μF IPUSB IPRGM VUSB SC820 GND STATB ENB BAT VAD Typical Application Circuit September 17, 2009 |
Số phần tương tự - SC820 |
|
Mô tả tương tự - SC820 |
|
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |