AT90PWM3 datasheet(71/361 Pages) ATMEL

tên linh kiện	AT90PWM3

Giải thích chi tiết về linh kiện	8-bit Microcontroller with 8K Bytes In-System Programmable Flash

PDF	361 Pages

Scroll/Zoom	100%

nhà sản xuất	ATMEL [ATMEL Corporation]

Trang chủ	http://www.atmel.com

Logo

71 / 361 page

4317J–AVR–08/10

AT90PWM2/3/2B/3B

ADC10, Analog to Digital Converter, input channel 10.

ACMP1, Analog Comparator 1 Positive Input. Configure the port pin as input with the internal

pull-up switched off to avoid the digital port function from interfering with the function of the Ana-

log Comparator.

• ADC9/AMP1+ – Bit 5

ADC9, Analog to Digital Converter, input channel 9.

AMP1+, Analog Differential Amplifier 1 Positive Input Channel.

• ADC8/AMP1- – Bit 4

ADC8, Analog to Digital Converter, input channel 8.

AMP1-, Analog Differential Amplifier 1 Negative Input Channel.

• T1/PSCOUT23 – Bit 3

T1, Timer/Counter1 counter source.

PSCOUT23: Output 3 of PSC 2.

• T0/PSCOUT22 – Bit 2

T0, Timer/Counter0 counter source.

PSCOUT22: Output 2 of PSC 2.

• PSCIN1/OC1B, Bit 1

PCSIN1, PSC 1 Digital Input.

OC1B, Output Compare Match B output: This pin can serve as an external output for the

Timer/Counter1 Output Compare B. The pin has to be configured as an output (DDC1 set “one”)

to serve this function. This pin is also the output pin for the PWM mode timer function.

• PSCOUT10/INT3 – Bit 0

PSCOUT10: Output 0 of PSC 1.

INT3, External Interrupt source 3: This pin can serve as an external interrupt source to the MCU.

AT90PWM3 bảng dữ liệu(PDF) 71 Page - ATMEL Corporation