541

Motor driver ICs

BA6477FS

FOperation notes

(1)

Thermal shutdown circuit

This circuit shuts down all the IC currents when the chip

junction temperature is increased to about 175

_C (typi-

cal). The thermal shutdown circuit is deactivated when

the temperature drops to about 155

_C (typical).

(2)

Hall elements connection

Hall elements can be connected in either series or paral-

lel. When connecting in series, care must be taken not to

allow the Hall output to exceed the Hall common-mode

input range.

(3)

Hall input level

Switching noise may occur if the Hall input voltage (pins

17

are recommended.

(4)

Driver ground pin (pin 14)

Pin 14, which is the motor current ground pin, is not con-

nected to the signal ground pin (pin 26). Design a proper

conductor pattern in consideration of the motor current

that flows through pin 14.

(5)

External clock

and more than the ground voltage.