FS401 datasheet(90/104 Pages) ETC2

90 / 104 page

FS401, FS403

PRODUCT SPECIFICATION

REV. NO. 1.7

JANUARY 24, 2007

6. Specifications

6.1 Absolute Maximum Ratings

(beyond which the device may be damaged)1

Parameter

Min

Typ

Max

Unit

Power Supply Voltages

VDD (Measured to VSS)

-0.5

3.3

4.6

VDDAD (Measured to VSSAD)

-0.5

3.3

4.6

VDDPA and VDDPF (Measured to VSSPA and VSSPF)

-0.5

3.3

4.6

VDDDA (Measured to VSSDA)

-0.5

3.3

4.6

VSSAD, VSSPA, VSS, VSSPA, VSSDA (delta)

-0.5

0.5

Digital Inputs

3.3 V logic applied voltage (Measured to VSS)2

-0.5

VDD + 0.5

Forced current 3, 4

-10.0

10.0

Analog Inputs

Applied Voltage (Measured to VSSAD)2

-0.5

VDDDA + 0.5

Forced current 3, 4

-10.0

10.0

Digital Outputs

3.3 V logic applied voltage (Measured to VSS)2

-0.5

VDD + 0.5

Forced current 3, 4

-6.0

6.0

Short circuit duration (single output in HIGH state to

ground)

second

Temperature

Operating, Ambient

-20

110

°C

Junction

150

°C

Lead Soldering (10 seconds)

300

°C

Vapor Phase Soldering (1 minute)

220

°C

Storage

-65

150

°C

Electrostatic Discharge5

±150

Notes:

1. Functional operation under any of these conditions is NOT implied. Performance and reliability are

guaranteed only if Operating Conditions are not exceeded.

2. Applied voltage must be current limited to specified range.

3. Forcing voltage must be limited to specified range.

4. Current is specified as conventional current flowing into the device.

5. EIAJ test method.

FS401 bảng dữ liệu(PDF) 90 Page - List of Unclassifed Manufacturers

FS401 bảng dữ liệu(HTML) 90 Page - List of Unclassifed Manufacturers

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL