PC912XDP512F0CALR datasheet(61/1348 Pages) FREESCALE

61 / 1348 page

Chapter 1 Device Overview MC9S12XD-Family

MC9S12XDP512 Data Sheet, Rev. 2.21

Freescale Semiconductor

1.2.3.32

PH0 / KWH0 / MISO1 — Port H I/O Pin 0

PH0 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the

MCU to exit stop or wait mode. It can be conﬁgured as master input (during master mode) or slave output

(during slave mode) pin MISO of the serial peripheral interface 1 (SPI1).

1.2.3.33

PJ7 / KWJ7 / TXCAN4 / SCL0 / TXCAN0— PORT J I/O Pin 7

PJ7 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as the transmit pin TXCAN for the scalable controller area

network controller 0 or 4 (CAN0 or CAN4) or as the serial clock pin SCL of the IIC0 module.

1.2.3.34

PJ6 / KWJ6 / RXCAN4 / SDA0 / RXCAN0 — PORT J I/O Pin 6

PJ6 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as the receive pin RXCAN for the scalable controller area

network controller 0 or 4 (CAN0 or CAN4) or as the serial data pin SDA of the IIC0 module.

1.2.3.35

PJ5 / KWJ5 / SCL1 / CS2 — PORT J I/O Pin 5

PJ5 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as the serial clock pin SCL of the IIC1 module. It can be

conﬁgured to provide a chip-select output.

1.2.3.36

PJ4 / KWJ4 / SDA1 / CS0 — PORT J I/O Pin 4

PJ4 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as the serial data pin SDA of the IIC1 module. It can be

conﬁgured to provide a chip-select output.

1.2.3.37

PJ2 / KWJ2 / CS1 — PORT J I/O Pin 2

PJ2 is a general-purpose input or output pins. It can be conﬁgured to generate an interrupt causing the

MCU to exit stop or wait mode. It can be conﬁgured to provide a chip-select output.

1.2.3.38

PJ1 / KWJ1 / TXD2 — PORT J I/O Pin 1

PJ1 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as the transmit pin TXD of the serial communication

interface 2 (SCI2).

1.2.3.39

PJ0 / KWJ0 / RXD2 / CS3 — PORT J I/O Pin 0

PJ0 is a general-purpose input or output pin. It can be conﬁgured to generate an interrupt causing the MCU

to exit stop or wait mode. It can be conﬁgured as the receive pin RXD of the serial communication interface

2 (SCI2).It can be conﬁgured to provide a chip-select output.

PC912XDP512F0CALR bảng dữ liệu(PDF) 61 Page - Freescale Semiconductor, Inc

PC912XDP512F0CALR bảng dữ liệu(HTML) 61 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL