CJ2M-CPU3

@/-CPU1@

8

Function

Description

Communications

−

Peripheral (USB)

Port

Peripheral Bus

Bus for communications with various kinds of Support Software running on a personal

computer. High-speed communications are supported.

Serial Port (Option)

*9

Application is possible when a Serial Communications Option Board is mounted.

Host Link (SYSWAY) Communications

Host Link commands or FINS commands placed between Host Link headers and terminators

can be sent from a host computer or PT to read/write I/O memory, read/control the operating

mode, and perform other operations for PLC.

No-protocol Communications

I/O instructions for communications ports (such as TXD/RXD instructions) can be used for

data transfer with peripheral devices such as bar code readers and printers.

NT Link Communications

I/O memory in the PLC can be allocated and directly linked to various PT functions, including

status control areas, status notification areas, touch switches, lamps, memory tables, and

other objects.

Peripheral Bus

Bus for communications with various kinds of Support Software running on a personal

computer. High-speed communications are supported.

Serial Gateway

This gateway enables receiving and automatically converting FINS to the CompoWay/F.

Serial PLC Links

Data is exchanged between CPU Units using serial ports without communications

programming. PTs set to the 1:N NT Link protocol can be included in the network.

EtherNet/IP Port

*10

100Base-TX/10Base-T

Protocols: TCP/IP, UDP, ARP, ICMP (ping only), BOOTP

Applications: FINS, CIP, SNTP, DNS (Client), FTP (Server)

CIP

Communications

Service

Tag Data Links

Programless cyclic data exchanges with the devices on the EtherNet/IP network.

Message Communications

Any CIP commands can be received from the devices on the EtherNet/IP network.

FINS

Communications

Service

Message Communications

Any FINS commands can be transferred with the devices on the EtherNet/IP network.

Interrupt

Scheduled Interrupts

Tasks can be executed at a specified interval (minimum of 0.2 ms, Unit: 0.1 ms).

Resetting and restarting with MSKS(690)

When MSKS(690) is executed, the internal timer is restarted and the time to first interrupt is

set to a fixed value.

Reading present value of internal timer with

MSKS(690)

MSKS(690) can be used to read the time that has elapsed until the schedule interrupt is started

or since the previous scheduled interrupt.

Power OFF Interrupts

A task can be executed when CPU Unit's power turns OFF.

I/O Interrupt Tasks

A task can be executed when an input signal is input to an Interrupt Input Unit.

External Interrupt Tasks

A task can be executed when interrupts are requested from a Special I/O Unit or a CPU Bus

Unit.

Clock

Clock Function

Clock data is stored in memory.

Accuracy (Accuracy depends on the temperature.)

Ambient temperature of 55

°C: −3.5 to +0.5 min error per month

Ambient temperature of 25

°C: −1.5 to +1.5 min error per month

Ambient temperature of 0

°C: −3 to +1 min error per month

Operation Start Time Storage

The time when operating mode was last changed to RUN mode or MONITOR mode is stored.

Operation Stop Time Storage

The last time a fatal error occurred or the last time the operating mode was changed to

PROGRAM mode is stored.

Startup Time Storage

The time when the power was turned ON is stored.

Power Interruption Time Storage

The time when the power is turned OFF is stored.

Total Power ON Time Calculation

The total time that the PLC has been ON is stored in increments of 10 hours.

Power ON Clock Data Storage

A history of the times when the power was turned ON is stored.

User Program Overwritten Time Storage

The time that the user program was last overwritten is stored.

Parameter Date Storage

The time when the Parameter Area was overwritten is stored.

Power

Supply

Management

Memory Protection

Holding Area data, DM Area data, EM Area data, Counter Completion Flags, and counter

present values are held even when power is turned OFF. CIO Area, Work Area, some Auxiliary

Area data, and Timer Completion Flags, timer present values, index registers, and data

registers can be protected by turning ON the IOM Hold Bit in the Auxiliary Area, and by also

setting the IOM Hold Bit to “Hold” in the PLC Setup.

Power OFF Detection Time Setting

The detection time for power interruptions can be set.

AC power supply: 10 to 25 ms (variable)

DC power supply: 2 to 5 ms (CJ1W-PD022) or 2 to 20 ms (CJ1W-PD025)

Power OFF Detection Delay Time

The detection of power interruptions can be delayed: 0 to 10 ms

(Not supported by the CJ1W-PD022.)

Number of Power Interruptions Counter

The number of times power has been interrupted is counted.

*9.A Serial Option Board is required to use a serial port for the CJ2M-CPU3@ CJ2M CPU Unit.

*10.Supported only by the CJ2M-CPU3@.