PIC16F616-ESLASHML datasheet(36/214 Pages) MICROCHIP

36 / 214 page

PIC16F610/616/16HV610/616

DS41288F-page 36

4.2.4

PIN DESCRIPTIONS AND

DIAGRAMS

Each PORTA pin is multiplexed with other functions.

The pins and their combined functions are briefly

described

here.

For

specific

information

about

individual functions such as the Comparator or the

ADC, refer to the appropriate section in this data sheet.

4.2.4.1

RA0/AN0(1)/C1IN+/ICSPDAT

Figure 4-1 shows the diagram for this pin. The RA0 pin

is configurable to function as one of the following:

• a general purpose I/O

• an analog input for the ADC

(1)

• an analog non-inverting input to the comparator

• In-Circuit Serial Programming data

4.2.4.2

RA1/AN1(1)/C12IN0-/VREF(1)/

ICSPCLK

Figure 4-1 shows the diagram for this pin. The RA1 pin

is configurable to function as one of the following:

• a general purpose I/O

• an analog input for the ADC

(1)

• an analog inverting input to the comparator

• a voltage reference input for the ADC

(1)

• In-Circuit Serial Programming clock

FIGURE 4-1:

BLOCK DIAGRAM OF RA<1:0>

Note 1: PIC16F616/16HV616 only.

VDD

VSS

VDD

Weak

RD PORTA

IOCA

Interrupt-on-

To Comparator

Analog(1)

Input Mode

RAPU

Analog(1)

Input Mode

Change

WPUA

Data Bus

WPUA

PORTA

TRISA

PORTA

Note

Comparator mode and ANSEL determines Analog Input mode.

Set has priority over Reset.

PIC16F616/16HV616 only.

To A/D Converter(3)

I/O Pin

S(2)

From other

RA<5:1> pins (RA0)

Write ‘0’ to RAIF

RA<5:2, 0> pins (RA1)

PIC16F616-E/ML bảng dữ liệu(PDF) 36 Page - Microchip Technology

PIC16F616-E/ML bảng dữ liệu(HTML) 36 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL