TUSB1310 datasheet(22/36 Pages) TI

22 / 36 page

TUSB1310

SLLSE16B – DECEMBER 2009 – REVISED JUNE 2010

www.ti.com

Table 3-8. Disparity Errors

RX_STATUS2-0

DETECTED ERROR

LENGTH

Clock cycles during the ef-fected byte is

111b

Disparity error

transferred on RX_DATA15-0

3.5

Loopback

The TUSB1310 begins an internal loopback operation from SSRXP/SSRXN differential pairs to

SSTXP/SSTXN differential pairs when the TX_DETRX_LPBK is asserted while holding TX_ELECIDLE

de-asserted. The TUSB1310 will stop transmitting data to the SSTXP/SSTXN signaling pair from the

TX_DATA and begin transmitting on the SSTXP/SSTXN signaling pair the data received at the

SSRXP/SSRXN signaling pair. This data is not routed through the 8b/10b coding/encoding paths. While in

the loopback operation, the received data is still sent to the RX_DATA. The data sent to the RX_DATA is

routed through the 10b/8b decoder.

The TX_DETRX_LPBK de-assertion will terminate the loopback operation and return to transmitting

TX_DATA over the SSTXP/SSTXN signaling pair. The TUSB1310 only transitions out of loopback on

detection of LFPS signaling by transitioning to P2 state and starting the LFPS handshake.

FUNCTIONAL DESCRIPTION

Submit Documentation Feedback

Product Folder Link(s): TUSB1310

TUSB1310 bảng dữ liệu(PDF) 22 Page - Texas Instruments