B161

DF1E Series

BPrecautions

1. Recommended Soldering Condition

Flow: 260ç for 10 seconds

Manual soldering: 300ç for 3 seconds

2. Cleaning Condition

Refer to Nylon Connector Use Hand book.

However, if the connector is cleaned by the potting header, the detergent remains within the

connector, which will cause malfunction.

3. Connection Condition

Refer to Nylon Connector Use Hand book.

4. Cautions

● To remove the connector, if the connector is forcedly removed, it will cause connector

damage. If the connector is hardly removed, slightly push the connector once, and then

remove it using the lock.

● In some method for laying the cable within equipment, a tension may be applied to the

cable so as to remove the contact. In this case, it is recommended to use the retainer.

● Incomplete insertion of the contact can be prevented by mounting a retainer; however,

mounting of a retainer might not be possible when the contact protrudes beyond the

socket. Insert the contact securely and then mount the retainer.

● If the potting process is implemented, it is desirable to fill the connector with resin,

considering the resin surface tensile force.

● The color phase of this product may be slightly different from that of the forming product

according to the manufacturing lot and future storage conditions, however the difference

doesn't affect the performance.

5. Precautions

Refer to Nylon Connector Use Hand book.

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.

All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.