| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
PCA9632DP2 bảng dữ liệu(PDF) 17 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
PCA9632DP2 bảng dữ liệu(HTML) 17 Page - NXP Semiconductors |
|
17 / 38 page ![]() PCA9632_3 © NXP B.V. 2008. All rights reserved. Product data sheet Rev. 03 — 15 July 2008 17 of 38 NXP Semiconductors PCA9632 4-bit Fm+ I2C-bus low power LED driver [1] External pull-up or LED current limiting resistor connects LEDn to VDD. 7.7 Individual brightness control with group dimming/blinking A 1.5625 kHz fixed frequency signal with programmable duty cycle (8 bits, 256 steps) is used to control individually the brightness for each LED. On top of this signal, one of the following signals can be superimposed (this signal can be applied to the 4 LED outputs): • A lower 190 Hz fixed frequency signal with programmable duty cycle (4 bits, 16 steps) is used to provide a global brightness control. • A programmable frequency signal from 24 Hz to 1 ⁄ 10.73 Hz (8 bits, 256 steps) with programmable duty cycle (6 bits, 64 steps) is used to provide a global blinking control for (24 Hz to 6 Hz) and (8 bits, 256 steps) for (6 Hz to 1 ⁄ 10.73 Hz). Table 15. Output transistors based on LEDOUT registers, INVRT and OUTDRV bits LEDOUT INVRT OUTDRV Upper transistor (VDD to LEDn) Lower transistor (LEDn to VSS) LEDn state 00 LED driver off 0 0 off off high-Z[1] 0 1 on off VDD 1 0 off on VSS 1 1 off on VSS 01 LED driver on 0 0 off on VSS 0 1 off on VSS 1 0 off off high-Z[1] 1 1 on off VDD 10 Individual brightness control 0 0 off Individual PWM (non-inverted) VSS or high-Z[1] = PWMx value 0 1 Individual PWM (non-inverted) Individual PWM (non-inverted) VSS or VDD = PWMx value 1 0 off Individual PWM (inverted) high-Z[1] or VSS = 1 − PWMx value 1 1 Individual PWM (inverted) Individual PWM (inverted) VDD or VSS = 1 − PWMx value 11 Individual + group dimming/ blinking 0 0 off Individual + Group PWM (non-inverted) VSS or high-Z[1] = PWMx/GRPPWM values 0 1 Individual PWM (non-inverted) Individual PWM (non-inverted) VSS or VDD = PWMx/GRPPWM values 1 0 off Individual + Group PWM (inverted) high-Z[1] or VSS = (1 − PWMx) or (1 − GRPPWM) values 1 1 Individual PWM (inverted) Individual PWM (inverted) VDD or VSS =(1 − PWMx) or (1 − GRPPWM) values |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |