S9S08DV96F2CLL datasheet(74/458 Pages) FREESCALE

74 / 458 page

Chapter 4 Memory

MC9S08DZ128 Series Data Sheet, Rev. 1

Freescale Semiconductor

4.6.7

Block Protection

The block protection feature prevents the protected region of FLASH or EEPROM from program or erase

changes. Block protection is controlled through the FLASH and EEPROM protection register (FPROT).

The EPS bits determine the protected region of EEPROM and the FPS bits determine the protected region

of FLASH. See Section 4.6.11.4, “FLASH and EEPROM Protection Register (FPROT and NVPROT).”

After exit from reset, FPROT is loaded with the contents of the NVPROT location, which is in the

nonvolatile register block of the FLASH memory. FPROT cannot be changed directly from application

software so a runaway program cannot alter the block protection settings. Because NVPROT is within the

last sector of FLASH, if any amount of memory is protected, NVPROT is itself protected and cannot be

altered (intentionally or unintentionally) by the application software. FPROT can be written through

background debug commands, which provides a way to erase and reprogram protected FLASH memory.

One use for block protection is to block protect an area of FLASH memory for a bootloader program. This

bootloader program then can be used to erase the rest of the FLASH memory and reprogram it. The

bootloader is protected even if MCU power is lost during an erase and reprogram operation.

4.6.8

Vector Redirection

Whenever any FLASH is block protected, the reset and interrupt vectors will be protected. Vector

redirection allows users to modify interrupt vector information without unprotecting bootloader and reset

vector space. Vector redirection is enabled by programming the FNORED bit in the NVOPT register to 0.

For redirection to occur, at least some portion of the FLASH memory must be block protected by

programming the FPS bits in the NVPROT register. All interrupt vectors (memory locations 0x0_FF80

through 0x0_FFFD) are redirected, though the reset vector (0x0_FFFE:0x0_FFFF) is not.

For example, if 8192 bytes of FLASH are protected, the protected address region is from 0x0_E000

through 0x0_FFFF. The interrupt vectors (0x0_FF80 through 0x0_FFFD) are redirected to the locations

0x0_DF80 through 0x0_DFFD. If vector redirection is enabled and an interrupt occurs, the values in the

locations 0x0_DFE0:0x0_DFE1 are used for the vector instead of the values in the locations

0x0_FFE0:0x0FFE1. This allows the user to reprogram the unprotected portion of the FLASH with new

program code including new interrupt vector values while leaving the protected area, which includes the

default vector locations, unchanged.

4.6.9

Security

The MC9S08DZ128 Series includes circuitry to prevent unauthorized access to the contents of FLASH,

EEPROM, and RAM memory. When security is engaged, FLASH, EEPROM, and RAM are considered

secure resources. Direct-page registers, high-page registers, and the background debug controller are

considered unsecured resources. Programs executing within secure memory have normal access to any

MCU memory locations and resources. Attempts to access a secure memory location with a program

executing from an unsecured memory space or through the background debug interface are blocked (writes

are ignored and reads return all 0s).

Security is engaged or disengaged based on the state of two register bits (SEC[1:0]) in the FOPT register.

During reset, the contents of the nonvolatile location NVOPT are copied from FLASH into the working

FOPT register in high-page register space. A user engages security by programming the NVOPT location,

S9S08DV96F2CLL bảng dữ liệu(PDF) 74 Page - Freescale Semiconductor, Inc

S9S08DV96F2CLL bảng dữ liệu(HTML) 74 Page - Freescale Semiconductor, Inc

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL