ADMP421 datasheet(8/16 Pages) AD

tên linh kiện	ADMP421

Giải thích chi tiết về linh kiện	Omnidirectional Microphone with Bottom Port and Digital Output

PDF	16 Pages

Scroll/Zoom	100%

nhà sản xuất	AD [Analog Devices]

Trang chủ	http://www.analog.com

Logo

8 / 16 page

ADMP421

Rev. 0 | Page 8 of 16

PCB LAND PATTERN LAYOUT

The recommended PCB land pattern for the ADMP421 should

be laid out to a 1:1 ratio to the solder pads on the microphone

package, as shown in Figure 8. Care should be taken to avoid

applying solder paste to the sound hole in the PCB. A suggested

solder paste stencil pattern layout is shown in Figure 9. The

diameter of the sound hole in the PCB should be larger than the

diameter of the sound port of the microphone. A minimum

diameter of 0.5 mm is recommended.

4× 0.40 × 0.60

(0.30)

0.90

(0.30)

ø1.70

3.80

(0.30)

0.35

2.80

2× R0.10

(0.30)

0.35

2.05

0.70

ø1.10

Figure 8. Suggested PCB Land Pattern Layout

1.45

0.9

2.45

0.7

1.525

1.498

0.205 WIDE

0.248 × 0.498 (2×)

0.248 × 1.148 (2×)

0.248 × 0.948 (2×)

1.498 × 0.248

0.398 × 0.298 (4×)

0.362 CUT (3×)

1.17

Figure 9. Suggested Solder Paste Stencil Pattern Layout

ADMP421 bảng dữ liệu(PDF) 8 Page - Analog Devices

ADMP421 bảng dữ liệu(HTML) 8 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

bảng dữ liệu tải về

Link URL