For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

8

8 - 353

Evaluation PCB

The circuit board used in the final application should

use RF circuit design techniques. Signal lines

should have 50 ohm impedance while the package

ground leads and exposed paddle should be con-

nected directly to the ground plane similar to that

shown. A sufficient number of via holes should be

used to connect the top and bottom ground planes.

The evaluation board should be mounted to an

appropriate heat sink. The evaluation circuit board

shown is available from Hittite upon request.

Item

Description

J1 - J2

PCB Mount K Connector

J3 - J6

DC Pin

C1 - C3

100 pF Capacitor, 0402 Pkg.

C4 - C6

1,000 pF Capacitor, 0603 Pkg.

C7 - C9

2.2 μF Capacitor, Tantalum

U1

HMC751LC4 Amplifier

123813 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350 or Arlon 25FR

HMC751LC4

v00.0409

SMT PHEMT LOW NOISE

AMPLIFIER, 17 - 27 GHz