S

S

D

H

C

C

a

d

s

e

e

s

s

4~32GB High Capacity Secure Digital Card

Transcend Information Inc.

12

1) This bit is valid only when the card power up status bit is set.

2) This bit is set to LOW if the card has not finished the power up routine.

The supported voltage range is coded as shown in Table 5-1. A voltage range is not supported if the

corresponding bit value is set to LOW. As long as the card is busy, the corresponding bit (31) is set to

LOW.

2. CID Register

The Card IDentification (CID) register is 128 bits wide. It contains the card identification information used during the card

identification phase. Every individual flash card shall have a unique identification number. The structure of the CID

register is defined in the following paragraphs:

An 8-bit binary number that identifies the card manufacturer. The MID number is controlled, defined,

and allocated to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to

ensure uniqueness of the CID register.

A 2-character ASCII string that identifies the card OEM and/or the card contents (when used as a

distribution media either on ROM or FLASH cards). The OID number is controlled, defined, and allocated

to a SD Memory Card manufacturer by the SD-3C, LLC. This procedure is established to ensure

uniqueness of the CID register.

Note: SD-3C, LLC licenses companies that wish to manufacture and/or sell SD Memory Cards, including but not limited to flash memory,

ROM, OTP, RAM, and SDIO Combo Cards.

SD-3C, LLC is a limited liability company established by Matsushita Electric Industrial Co. Ltd., SanDisk Corporation and Toshiba

Corporation.

The product name is a string, 5 ASCII characters long.