PD035OX4

The information contained herein is the exclusive property of Prime View International Co., Ltd. and shall not be distributed,

reproduced, or disclosed in whole or in part without prior written permission of Prime View International Co., Ltd.

PAGE:7

Note 5-1 : Digital data input. DX0 is LSB and DX7 is MSB.

If parallel RGB input mode is used, D0X, D1X, and D2X indicate R, G and B data in turn.

If serial RGB or CCIR601/656 input mode is selected, only D07~D00 are used, and others

short to Vss.

Note 5-3 : The output voltage is determined by the digital input data. If digital RGB or CCIR601/656

input mode is selected, The 8 gamma correction reference voltages can be set to

externally or generate internally.

If VSET = ”H”, the gamma correction voltage generated externally

V1

V2

V3

V4

V5

V6

V7

V8

Default

Voltage(V)

4.29

3.73

3.33

2.94

2.62

2.22

1.51

0.48

Note 5-4 : Horizontal sync input in digital RGB mode. Or HREF input in CCIR601 mode.

( Short to Vss if not used )

Note 5-5 : Vertical sync input in digital RGB mode. Or V123 input in CCIR601 mode.

( Short to Vss if not used )

Note 5-6 : Digital RGB data input format

For digital RGB input data format, both SYNC. Mode and DEN mode are supported. If

DEN signal is fixed low, SYNC. Mode is used. Otherwise , DEN mode is used.

Note 5-9 : ILED Typ. = 20mA., VLED Typ. = 9V

P-511-295(V:2)