ATtiny5 datasheet(92/168 Pages) ATMEL

tên linh kiện	ATtiny5

Giải thích chi tiết về linh kiện	8-bit Microcontroller with 512/1024 Bytes In-System Programmable Flash

PDF	168 Pages

Scroll/Zoom	100%

nhà sản xuất	ATMEL [ATMEL Corporation]

Trang chủ	http://www.atmel.com

Logo

92 / 168 page

8127C–AVR–10/09

ATtiny4/5/9/10

• Differential Non-linearity (DNL): The maximum deviation of the actual code width (the interval

between two adjacent transitions) from the ideal code width (1 LSB). Ideal value: 0 LSB.

Figure 13-12. Differential Non-linearity (DNL)

• Quantization Error: Due to the quantization of the input voltage into a finite number of codes,

a range of input voltages (1 LSB wide) will code to the same value. Always ± 0.5 LSB.

• Absolute Accuracy: The maximum deviation of an actual (unadjusted) transition compared to

an ideal transition for any code. This is the compound effect of offset, gain error, differential

error, non-linearity, and quantization error. Ideal value: ± 0.5 LSB.

13.11 ADC Conversion Result

After the conversion is complete (ADIF is high), the conversion result can be found in the ADC

Data Register (ADCL). For single ended conversion, the result is

where VIN (see Table 13-2 on page 93) is the voltage on the selected input pin and VCC is the

voltage reference. 0x00 represents analog ground, and 0xFF represents the selected reference

voltage minus one LSB.

Output Code

0xFF

0x00

VREF

Input Voltage

DNL

1 LSB

ADCL

VIN 256

⋅

VCC

-----------------------

ATtiny5 bảng dữ liệu(PDF) 92 Page - ATMEL Corporation