ATmega328P datasheet(62/345 Pages) ATMEL

62 / 345 page

7810A–AVR–11/09

ATmega328P [Preliminary]

12.2

12.2.1

EICRA – External Interrupt Control Register A

The External Interrupt Control Register A contains control bits for interrupt sense control.

• Bit 7..4 – Res: Reserved Bits

These bits are unused bits in the ATmega328P, and will always read as zero.

• Bit 3, 2 – ISC11, ISC10: Interrupt Sense Control 1 Bit 1 and Bit 0

The External Interrupt 1 is activated by the external pin INT1 if the SREG I-flag and the corre-

sponding interrupt mask are set. The level and edges on the external INT1 pin that activate the

interrupt are defined in Table 12-1. The value on the INT1 pin is sampled before detecting

edges. If edge or toggle interrupt is selected, pulses that last longer than one clock period will

generate an interrupt. Shorter pulses are not guaranteed to generate an interrupt. If low level

interrupt is selected, the low level must be held until the completion of the currently executing

instruction to generate an interrupt.

• Bit 1, 0 – ISC01, ISC00: Interrupt Sense Control 0 Bit 1 and Bit 0

The External Interrupt 0 is activated by the external pin INT0 if the SREG I-flag and the corre-

sponding interrupt mask are set. The level and edges on the external INT0 pin that activate the

interrupt are defined in Table 12-2. The value on the INT0 pin is sampled before detecting

edges. If edge or toggle interrupt is selected, pulses that last longer than one clock period will

generate an interrupt. Shorter pulses are not guaranteed to generate an interrupt. If low level

interrupt is selected, the low level must be held until the completion of the currently executing

instruction to generate an interrupt.

Bit

(0x69)

–

ISC11

ISC10

ISC01

ISC00

EICRA

Read/Write

R/W

Initial Value

Table 12-1.

Interrupt 1 Sense Control

ISC11

ISC10

Description

The low level of INT1 generates an interrupt request.

Any logical change on INT1 generates an interrupt request.

The falling edge of INT1 generates an interrupt request.

The rising edge of INT1 generates an interrupt request.

Table 12-2.

Interrupt 0 Sense Control

ISC01

ISC00

Description

The low level of INT0 generates an interrupt request.

Any logical change on INT0 generates an interrupt request.

The falling edge of INT0 generates an interrupt request.

The rising edge of INT0 generates an interrupt request.

ATmega328P bảng dữ liệu(PDF) 62 Page - ATMEL Corporation

ATmega328P bảng dữ liệu(HTML) 62 Page - ATMEL Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL