ICS8735-21 datasheet(16/20 Pages) IDT

tên linh kiện	ICS8735-21

Giải thích chi tiết về linh kiện	700MHz, DIFFERENTIAL-TO-3.3V LVPECL ZERO DELAY CLOCK GENERATOR

PDF	20 Pages

Scroll/Zoom	100%

nhà sản xuất	IDT [Integrated Device Technology]

Trang chủ	http://www.idt.com

Logo

16 / 20 page

ICS8735-21

700MHZ, DIFFERENTIAL-TO-3.3V LVPECL ZERO DELAY CLOCK GENERATOR

IDT™ / ICS™ 3.3V LVPECL ZERO DELAY CLOCK GENERATOR

ICS8735AM-21 REV. A JULY 31, 2008

3. Calculations and Equations.

The purpose of this section is to derive the power dissipated into the load.

LVPECL output driver circuit and termination are shown in Figure 7.

Figure 7. LVPECL Driver Circuit and Termination

To calculate worst case power dissipation into the load, use the following equations which assume a 50Ω load, and a termination voltage

of VCCO – 2V.

•

For logic high, VOUT = VOH_MAX = VCCO_MAX – 0.9V

(VCCO_MAX – VOH_MAX) = 0.9V

•

For logic low, VOUT = VOL_MAX = VCCO_MAX – 1.7V

(VCCO_MAX – VOL_MAX) = 1.7V

Pd_H is power dissipation when the output drives high.

Pd_L is the power dissipation when the output drives low.

Pd_H = [(VOH_MAX – (VCCO_MAX – 2V))/RL] * (VCCO_MAX – VOH_MAX) = [(2V – (VCCO_MAX – VOH_MAX))/RL] * (VCCO_MAX – VOH_MAX) =

[(2V – 0.9V)/50

Ω] * 0.9V = 19.8mW

Pd_L = [(VOL_MAX – (VCCO_MAX – 2V))/RL] * (VCCO_MAX – VOL_MAX) = [(2V – (VCCO_MAX – VOL_MAX))/RL] * (VCCO_MAX – VOL_MAX) =

[(2V – 1.7V)/50

Ω] * 1.7V = 10.2mW

Total Power Dissipation per output pair = Pd_H + Pd_L = 30mW

OUT

CCO

CCO - 2V

Ω

ICS8735-21 bảng dữ liệu(PDF) 16 Page - Integrated Device Technology