• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721

• China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2

Low Cost SMT Low Pass Filter

DC – 2000 MHz

Rev. V2

FL07-0002-G

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Parameter

Units

Min

Typ

Max

Insertion Loss:

DC – 2000 MHz

dB

—

0.6

1.0

VSWR:

DC – 2000 MHz

—

—

1.6:1

2.0:1

Rejection:

3500 – 4000 MHz

4000 – 6000 MHz

dB

dB

15

20

20

30

—

—

Absolute Maximum Ratings

3,4

Parameter

Absolute Maximum

Input Power

2 W CW

Operating Temperature

-40°C to +85°C

Storage Temperature

-65°C to +150°C

3.

Exceeding any one or combination of these limits may

cause permanent damage to this device.

4.

M/A-COM does not recommend sustained operation near

these survivability limits.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

GMIC

Circuits

are

sensitive

to

electrostatic

discharge (ESD) and can be damaged by static

electricity. Proper ESD control techniques should

be used when handling these devices.

VSWR vs. Frequency

Typical Performance Curves

Insertion Loss vs. Frequency