For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

12

12 - 27

Evaluation PCB

The circuit board used in the final application should use RF circuit design techniques. Signal lines should

have 50 ohm impedance while the package ground leads and exposed paddle should be connected

directly to the ground plane similar to that shown. A sufficient number of via holes should be used to

connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite

upon request.

HMC765LP6CE

v00.0609

FRACTIONAL-N SYNTHESIZER WITH

INTEGRATED VCO, 7.8 - 8.8 GHz