MAAPSS0071SMB datasheet(2/5 Pages) MA-COM

2 / 5 page

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

DECT Power Amplifier

1880 - 1930 MHz

Rev. V3

MAAPSS0071

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Electrical Specifications:

Frequency = 1905 MHz, PIN = -2 to 2 dBm, VCC = 2.4 V, VEN = 2.5 V, TA = 25 °C, Z0 = 50Ω

Operating the MAAPSS0071

The MAAPSS0071 can be damaged by electrostatic

discharge

(ESD).

Use

proper

ESD

control

techniques when handling this device. To operate

the MAAPSS0071, turn on the VCC before VEN for

power on and turn off VCC after VEN for shutdown.

Parameter

Test Conditions

Units

Min.

Typ.

Max

Input Return Loss

—

Output Power

—

dBm

Power Flatness

2.0 < VCC < 3.0 V

—

PAE

—

Current

—

400

500

Current, Off

VEN = 0 V

µA

—

Pdiss

POUT = 26.0 dBm

—

0.5

—

Control Pins

VEN, Low

VEN, High

Current

2.0

—

2.0

0.5

2.5

4.0

Harmonics

dBc

—

-35

-40

—

Forward Isolation

VEN = 0 V

—

Duty Cycle

—

100

Turn on/off time

Ton: RF burst to NTP-1

Toff: NTP-1 to off

µS

—

Stability

+1.5V < VCC < +3.5 V, PIN = -2 to 2 dBm, VSWR < 6:1

-20°C < TC < +70ºC, RBW = 3 MHz max hold

All spurs < -60 dBc

Lead-Free 3 mm 12-Lead PQFN

†

Reference Application Note M538 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

MAAPSS0071SMB bảng dữ liệu(PDF) 2 Page - M/A-COM Technology Solutions, Inc.

MAAPSS0071SMB bảng dữ liệu(HTML) 2 Page - M/A-COM Technology Solutions, Inc.

Html Pages

1 2 3 4 5

bảng dữ liệu tải về

Link URL