• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

3

GaAs Broadband DPDT Diversity Switch

2.0 - 6.0 GHz

Rev. V1

MASWSS0190

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Control

Control

ANT 1

- Rx

ANT 1

- Tx

ANT 2

- Tx

ANT 2

- Rx

1

0

On

Off

On

Off

0

1

Off

On

Off

On

1

1

Off

Off

Off

Off

0

0

Off

Off

Off

Off

Truth Table

5,6

5. 1 = +2.9 V to +5 V, 0 = 0 V + 0.2 V.

6. Differential voltage, V (state 1) - V (state 0), must be 2.7 V

minimum and must not exceed 8.5 V.

Parameter

Absolute Maximum

Input Power @ 3 V Control

+31 dBm

Input Power @ 5 V Control

+34 dBm

Voltage

± 8.5 volts

Operating Temperature

-40

Storage Temperature

-65

Absolute Maximum Ratings

3,4

3. Exceeding any one or combination of these limits may cause

permanent damage to this device.

4. M/A-COM does not recommend sustained operation near

these survivability limits.

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

Evaluation Board for

Lead-Free 2 mm 8-lead UTDFN Package

Application Schematic

C1,C2,C3,C4 = 8 pF

C5,C6 = 100 pF

Qualification

Qualified to M/A-COM specification REL-201, Proc-

ess Flow –2.