AT-119 datasheet(2/5 Pages) MA-COM

2 / 5 page

• North America Tel: 800.366.2266 / Fax: 978.366.2266

• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300

• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298

Visit www.macomtech.com for additional data sheets and product information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

2.25 Volt Voltage Variable Absorptive Attenuator

42 dB, 1.8 - 2.5 GHz

Rev. V9

AT-119

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Electrical Specifications: TA = 25°C, Frequency = 2.4 GHz, VCC = 3.3 V, Z0 = 50 Ω

Parameter

Test Conditions

4,5

Units

Min.

Typ.

Max.

Insertion Loss

VCTL = 2.25 V

—

2.4

3.2

Maximum Attenuation

VCTL = 0.5 V

—

Attenuation Slope

0.75 V < VCTL < 1.75 V

dB/V

—

Return Loss

0.0 V < VCTL < 0.75 V

0.75 V < VCTL < 1.75 V

1.75 V < VCTL < 2.25 V

—

Input Power for 1dB Change in Attenuation

0.75 V < VCTL < 2.25 V

dBm

—

Input 3rd Order Intercept Point

0.75 V < VCTL < 2.25 V

dBm

—

Switching Speed

50% VCTL to 10% / 90% RF

—

100

—

Transients

VCTL = 3 V, In-Band

—

4. External DC blocking capacitors are required on all RF ports.

5. VCC = +3.3 V @ 50 µA typical. VCTL = 0 V to +2.25 V @ 50 µA typical.

Application Schematic

RF IN/

OUT

RF IN/

OUT

VCC

V control

100 pF

220 pF

15 pF

RF IN/

OUT

RF IN/

OUT

VCC

V control

100 pF

220 pF

15 pF

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

AT-119 bảng dữ liệu(PDF) 2 Page - M/A-COM Technology Solutions, Inc.

AT-119 bảng dữ liệu(HTML) 2 Page - M/A-COM Technology Solutions, Inc.

Html Pages

1 2 3 4 5

bảng dữ liệu tải về

Link URL