CS5521 datasheet(55/56 Pages) CIRRUS

55 / 56 page

CS5521/22/23/24/28

DS317F8

Notes: 1. “D” and “E1” are reference datums and do not included mold flash or protrusions, but do include mold

mismatch and are measured at the parting line, mold flash or protrusions shall not exceed 0.20 mm per

side.

2. Dimension “b” does not include dambar protrusion/intrusion. Allowable dambar protrusion shall be

0.13 mm total in excess of “b” dimension at maximum material condition. Dambar intrusion shall not

reduce dimension “b” by more than 0.07 mm at least material condition.

3. These dimensions apply to the flat section of the lead between 0.10 and 0.25 mm from lead tips.

INCHES

MILLIMETERS

NOTE

DIM

MIN

NOM

MAX

MIN

NOM

MAX

0.084

2.13

0.002

0.006

0.010

0.05

0.13

0.25

0.064

0.068

0.074

1.62

1.73

1.88

0.009

0.015

0.22

0.38

2,3

0.311

0.323

0.335

7.90

8.20

8.50

0.291

0.307

0.323

7.40

7.80

8.20

0.197

0.209

0.220

5.00

5.30

5.60

0.022

0.026

0.030

0.55

0.65

0.75

0.025

0.03

0.041

0.63

0.75

1.03

∝

0°

4°

8°

0°

4°

8°

JEDEC #: MO-150

Controling Dimension is Millimeters.

24L SSOP PACKAGE DRAWING

1 23

SEATING

PLANE

E11

SIDE VIEW

END VIEW

TOP VIEW

∝

CS5521 bảng dữ liệu(PDF) 55 Page - Cirrus Logic

CS5521 bảng dữ liệu(HTML) 55 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56

bảng dữ liệu tải về

Link URL