MAX14541E datasheet(2/8 Pages) MAXIM

2 / 8 page

3-Channel, Low-Leakage ESD Protector

2 ______________________________________________________________________________________

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these

or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may

affect device reliability.

(Voltages referenced to GND.)

VCC to GND...........................................................-0.3V to +18V

I/O-1, I/O-2, I/O-3 to GND ........................ -0.3V to (VCC + 0.3V)

Continuous Power Dissipation (TA = +70NC)

5-Pin SC70 (derate 3.1mW/NC above +70NC) .........246.9mW

Thermal Resistance (Note 1)

JA.............................................................................324NC/W

JC ............................................................................115NC/W

Operating Temperature Range........................ -40NC to +125NC

Storage Temperature Range............................ -65NC to +150NC

Junction Temperature .....................................................+150NC

Lead Temperature (soldering, 10s) ................................+300NC

ELECTRICAL CHARACTERISTICS

(VCC = +5V, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25NC.) (Note 2)

ABSOLUTE MAXIMUM RATINGS

Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-

layer board. For detailed information on package thermal considerations, refer to www.maxim-ic.com/thermal-tutorial.

Note 2: Parameters are 100% production tested at TA = +25°C. Specifications over temperature guaranteed by design only.

Note 3: Idealized clamp voltages. See the Applications Information section for more information.

Note 4: Guaranteed by design, not production tested.

PARAMETER

SYMBOL

CONDITIONS

MIN

TYP

MAX

UNITS

Supply Voltage

VCC

0.9

Supply Current

ICC

100

Diode Forward Voltage

IF = 10mA, TA = +25°C

0.65

0.95

Channel Clamp Voltage

(Note 3)

TA = +25°C, ±15kV

Human Body Model,

IF = 10A

Positive transients

VCC +

Negative transients

-25

TA = +25°C, ±8kV

Contact Discharge

(IEC 61000-4-2),

IF = 24A

Positive transients

VCC +

Negative transients

-60

TA = +25°C, ±15kV

Air-Gap Discharge

(IEC 61000-4-2),

IF = 45A

Positive transients

VCC +

100

Negative transients

-100

Channel Leakage Current

(Note 4)

TA = -40°C to +50°C

-1

TA = -40°C to +125°C

-1

µA

I/O Capacitance

Bias of VCC/2, f = 1MHz (Note 4)

ESD PROTECTION

Human Body Model

±15

IEC 61000-4-2 Air-Gap

Discharge

±15

IEC 61000-4-2 Contact

Discharge

±8

MAX14541E bảng dữ liệu(PDF) 2 Page - Maxim Integrated Products

MAX14541E bảng dữ liệu(HTML) 2 Page - Maxim Integrated Products

Html Pages

1 2 3 4 5 6 7 8

bảng dữ liệu tải về

Link URL