SRT Resistor Technology

www.rhopointcomponents.com

sales@rhopointcomponents.com

High Temperature Chip Resistors

Draft

Type:

CHR-HT, CHS-HT, CHM-HT

Sizes:

0603, 0805, 1206, 1210, 2010, 2512, 4020

The SRT chip resistor series CHR, CHS und CHM with the extensipn –HT

are available for the working temperature range up to 300°C.

Features:

• High temperature applications up to 300°C

• Chip resistors in thick film technology

• PtAg-terminals

• Suitable for conductive epoxy applications and soldering

• Suitable for high vacuum applicatons – no organics

• Non-magnetic

Dimensions / Technical data:

Dimensions and data are conform with the data of the basic series CHR, CHS and CHM

(shown in the particular data sheets).

Speciality:

• TCR is valid for the temperature range +25°C …+125°C

• The final measuring of the resistors takes place at room temperature (independent of TCR)

• Please pay attention to the interconnection technology at high temperature applications.

• Temperature range:

-55°C ... +300°C

• Climatic category acc. to EN 60068-1

55/300/56

Packaging:

Bulk in plastic bags – minimum quantity 100 pieces per value

Blistertape acc. to IEC 60286-3 – minimum 1000 pieces per value

Reel diameter 180 mm or 330 mm

Ordering Data:

Type – HT – value – tolerance – TCR – packaging

Example: CHR-HT 0805 100K

±10% TCR250 Tape 180 mm

Not trimmed parts are indicated by the extension “NA” in the order code:

Type – HT – value – tolerance – NA – TCR - packaging

Example: CHS-HT 4020 10G

±10% NA TCR250 Tape 180 mm

If no requirements for TCR and taping are given, the highest value in table will be supplied and

packaging is bulk.

Issue 06-2008

NEW