P R E C I S I O N

I N

E L E C T R O N I C S

© Rhopoint Components Ltd, Hurst Green, Oxted, Surrey, RH8 9AX, UK

T +44 (0) 870 608 1188 sales@rhopointcomponents.com www.rhopointcomponents.com

TECHNICAL DATASHEET

TEMPERATURE SENSORS

• Response time down to 1mS (grounded)

• Low mass giving low thermal inertia (butt bonded

construction)

• Flexible will bond to flat or curved surfaces

• May be used with any standard readout equipment

Butt bonded thermocouples 20100 series

These thermocouples have their free filament supported on a temporary

polyimide film carrier. This is a tough, flexible and dimensionally stable

material rated at 260˚C continuous.

During installation the carrier can be peeled from the sensor or released by

the application of heat, alternatively parts of the carrier may be cut away

with scissors or a knife. Designed primarily for application with ceramic

cements. The free foil thermocouple can be easily brushed into a thin layer

of cement following application and drying of a thin insulating layer if an

ungrounded junction is required.

Dimensions in mm

20100-1

Type K

0.005

0.025 x 0.76

-160 to +815

20100-2

Type K

0.013

0.05 x 0.76

-160 to +815

20101-1

Type E

0.005

0.025 x 0.76

-160 to +650

20102-2

Type T

0.013

0.05 x 0.76

-160 to +370

Part

Thermocouple

Foil

Leads

Temperature

number

type

thickness (mm)

(mm)

range ˚C

20113

Type E

0.013

0.25

-195 to +260

20114

Type T

0.013

0.25

-195 to +260

Part

Thermocouple

Foil

Leads

Temperature

number

type

thickness (mm)

(mm)

range ˚C