LIS302DLH datasheet(28/37 Pages) STMICROELECTRONICS

28 / 37 page

LIS302DLH

28/37

Doc ID 15797 Rev 1

BDU bit is used to inhibit output registers update between the reading of upper and lower

continuously. If it is not sure to read faster than output data rate, it is recommended to set

BDU bit to ‘1’. In this way, after the reading of the lower (upper) register part, the content of

that output registers is not updated until the upper (lower) part is read too.

This feature avoids reading LSB and MSB related to different samples.

7.6

CTRL_REG5 (24h)

TurnOn bits are used for turning on the sleep to wake function.

Setting TurnOn[1:0] bits to 11 the “sleep to wake” function is enabled. When an interrupt

event occurs the device is turned to normal mode increasing the ODR to the value defined in

Table 29.

CTRL_REG4 description

BDU

Block data update. Default value: 0

(0: continuos update; 1: output registers not updated between MSB and LSB reading)

BLE

Big/little endian data selection. Default value 0.

(0: data LSB @ lower address; 1: data MSB @ lower address)

FS1, FS0

Full-scale selection. Default value: 00.

(00: ±2

g; 01: ±4 g; 11: ±8 g)

STsign

Self-test sign. Default value: 00.

(0: self-test plus; 1 self-test minus)

Self-test enable. Default value: 0.

(0: self-test disabled; 1: self-test enabled)

SIM

SPI serial interface mode selection. Default value: 0.

(0: 4-wire interface; 1: 3-wire interface)

Table 30.

CTRL_REG5 register

000

TurnOn1

TurnOn0

Table 31.

CTRL_REG5 description

TurnOn1,

TurnOn0

Turn-on mode selection for sleep to wake function. Default value: 00.

Table 32.

Sleep to wake configuration

TurnOn1

TurnOn0

Sleep to wake status

Sleep to wake function is disabled

Turned on: The device is in low power mode (ODR is defined in

CTRL_REG1)

LIS302DLH bảng dữ liệu(PDF) 28 Page - STMicroelectronics

LIS302DLH bảng dữ liệu(HTML) 28 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37

bảng dữ liệu tải về

Link URL