November 2006

ASM5P2304A

rev 1.5

3.3V Zero Delay Buffer

2 of 14

Notice: The information in this document is subject to change without notice.

ASM5P2304A Configurations

Device

Feedback From

Bank A Frequency

Bank B Frequency

ASM5P2304A-1

Bank A or Bank B

Reference

Reference

ASM5P2304A-1H

Bank A or Bank B

Reference

Reference

ASM5P2304A-2

Bank A

Reference

Reference /2

ASM5P2304A-2

Bank B

2 X Reference

Reference

ASM5P2304A-2H

Bank A

Reference

Reference/2

ASM5P2304A-2H

Bank B

2 X Reference

Reference

Zero Delay and Skew Control

For applications requiring zero input-output delay, all outputs must be equally loaded

.

To close the feedback loop of the ASM5P2304A, the FBK

pin can be driven from any of the four available output

pins. The output driving the FBK pin will be driving a total

load of 7pF plus any additional load that it drives. The

relative loading of this output (with respect to the

remaining outputs) can adjust the input output delay. This

is shown in the above graph.

For applications requiring zero input-output delay, all

outputs including the one providing feedback should be

equally loaded. If input-output delay adjustments are

required, use the above graph to calculate loading

differences between the feedback output and remaining

outputs. For zero output-output skew, be sure to load

outputs equally.

-30

-25

-20

-15

-10

-5

0

5

10

15

20

25

30

0

-500

-1000

-1500

500

1000

1500

Output Load Difference: FBK Load - CLKA/CLKB Load (pF)

REF Input to CLKA/CLKB Delay Vs Difference in Loading between FBK pin and CLKA/CLKB pins