Specifications

3

Parameter

Specification

Wavelength range

C-Band

1510-1580 nm

L-Band

1560-1625 nm

C+L Band

1510-1625 nm

Insertion loss (input to output)

Maximum

See table below

Wavelength flatness (input to output)

Maximum

0.002 dB/nm

Polarization dependent loss (input to output)

Maximum

0.03 dB

PMD (input to output)

Maximum

0.1 ps

Optical return loss

Minimum

45 dB

-5 V (typical)

PD responsivity

Minimum

0.8 A/W (for net responsivity, see table below)

PD linearity

±10%

PD dark current

Maximum

PD cut-off frequency

Input optical power

Maximum

See table below

Operating temperature

-20 to 75 °C

Storage temperature

-40 to 85 °C

Tensile load

Maximum

5 N

Package dimensions

Single unit

3.2 mm x 18.5 mm

6 to 8 channels array

32 mm x 32.5 mm x 6 mm

10 channels array

38.8 mm x 32.5 mm x 6 mm

Fiber type

SMF-28, 250 µm primary coating

Pigtail color code

Black (input port); Clear (output port)

Note: Parameters are specified for the signal wavelength range, all polarization states, and operating temperature range without connector unless otherwise stated.

MINIATURE INTEGRATED POWER MONITOR

Tap Ratio and Insertion Loss Table

Code

Tap Ratio

Maximum Insertion Loss

(Input to Output)

1

1%

0.5 dB

0.008 A/W

500 mW

2

2%

0.5 dB

0.016 A/W

250 mW

3

3%

0.5 dB

0.024 A/W

150 mW

4

4%

0.5 dB

0.032 A/W

125 mW

5

5%

0.6 dB

0.040 A/W

100 mW

T

10%

0.8 dB

0.080 A/W

50 mW

1. The net responsivity is defined as the ratio of the PD current output and optical power measured at output fiber.

2. The maximum optical power is the maximum value of the power at input port within the PD linearity range specified.