1150 Eglinton Avenue East

4607 S.E. International Way

Toronto, Ontario M3C 1H7

Milwaukie, Oregon 97222

1-866-740-1232

www.cdtechno-cps.com

1-971-206-2800

VR102B150CU_084-20882-04_RevB_Nov12-2004.fm

3 of 4

DC/DC Converter

Programmable, Single Output, 1.1V - 1.85Vout @ 60A

DC/DC Converter

Programmable, Single Output, 0.8375 - 1.600Vout @ 150A

Notes:

1.

Vin = 12Vdc, Ta = 25°C, Airflow = 400LFM unless otherwise noted.

2.

Output Ripple Voltage is specified when measured with Intel specified capacitance at the output of the converter.

3.

Transient response is specified with Intel specified capacitors at the output of the converter.

4.

If remote sense is not required or used, the Sense(+) and Sense(-) pins must be connected to Vo(+) and Vo(-) respectively.

5.

User will select the appropriate Load Line through the LL0 and LL1 signals. LL0 and LL1 signals are TTL compatible. The

default state is a 1.25mOhm Load Line.

6.

VRM_PRES and VRM_ID are connected to Vss on the VRM.

Mechanical Information

Figure 1

Recommended Interface Connector Options

Tyco/Elcon

283-0172-01303 (Solder Tail, Long)

283-0172-02303 (Solder Tail, Short)

284-0202-03003 (Surface Mount)