GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

CS-2027 Rev. A page 2 of 2

www.gamewell-fci.com

provide an isolated RS-232 output from the main CPU of

the 600 Series system panels. The IF602 and IF610 panels

have built-in RS-232 ports.

Applications

The SAN units provide a means for remote annunciation

and control of the system via a simple RS-232 connection.

These driver units fit neatly into an annunciator unit and

can be used to drive the LED or incandescent lights of a

standard or graphic-type annunciator. When it is necessary

for remote system control, the SAN-16-RC provides for up

to eight inputs for system control. Any or all inputs may be

used to customize any given command station’s capabili-

ties.

The SAN units can also be used to interface with other

building systems via ASCII or where dry contacts or a

switched output is required. The SAN’s outputs can be

used to drive a relay to interface or control virtually any

remote point or group of points.

Engineer’s Specifications

Remote annunciation and control for the main control panel

shall be supplied where indicated. Remote annunciation

and control shall be accomplished via the RS-232 data

communications line. It shall be possible to add up to 64

devices to the communication line. Each device shall be

capable of driving up to 128 points. It shall be possible to

mix annunciators, printers and LCD alphanumeric displays

on a single line without the need for special software.

Devices shall not be placement sensitive. All devices shall

be individually field programmable and independent from

each other. The device shall be Gamewell-FCI part

numbers.

.

Specifications

Serial Annunciator

Driver:

Basic SAN and SAN-RC provide 16-

point drives.

SAN

Input Power:

24 VAC/VDC

Standby Current: 0.04 A max.

Alarm Current:

2.0 A max.

Output Power:

0.040 A max. per output.

Dimensions:

12” W x 4” H x 2” D

(30.5 W x 10.2 H x 5.1 D cm)

PDM-16 Point Drive Module

Input Power:

From SAN Module

Standby Current: 0.002 A

Alarm Current:

0.002 A

Ordering Information

Model

Description

SAN-16

Serial annunciator driver module, main driver

with 16-outputs.

SAN-#

Serial annunciator driver module, specify

number of outputs in 16-point increments

(i.e., SAN-32, SAN-48, SAN-128). Includes

mounting track and interconnect cables.

Contact the Gamewell-FCI Technical

Support for details.

SAN-16-RC Serial annunciator driver with four-remote

control inputs, eight (8) common outputs and

16-outputs.

SAN-#-RC

Serial annunciator driver with four- remote

control inputs, eight (8) common outputs and

a specifiable number of outputs in 16-point

increments (i.e., SAN-32-RC, SAN-48-RC,

SAN-128-RC). Includes mounting track and

interconnect cables.

Contact Gamewell-FCI Technical Support for

details.

PDM-16

Point driver module for field-expanding

serial annunciator drivers, 16 outputs.

SIM-232

Required serial interface module, mounts in

600 Series control 632, 654, and 658 to sup-

ply RS-232 ouputs.

Note: This model is not required for use with

the IF602 and IF610 Systems.

GW70703

Programming cable (Programmed via a

the Gamewell-FCI website.

Note: This program is only available to

Gamewell-FCI authorized distributors.