MP-F datasheet(2/4 Pages) SYSTEMSENSOR

2 / 4 page

Page 2

A05-191-04

SP100 Series Speaker/Strobe Power Requirements

SP1W2415ADA

SP1W241575ADA

SP1W2475ADA

SP1W24110ADA

SP1R2415ADA

SP1R241575ADA

SP1R2475ADA

SP1R24110ADA

Supply Voltage:

20–30 VDC

Max. Current @ Listed Voltage:

75 mA

93 mA

170 mA

210 mA

Operating Current

@ Rectified Unfiltered Voltage:

90 mA

120 mA

200 mA

245 mA

Rated Light Output

15.0 cd

15/75 cd

75.0 cd

110.0 cd

Specifications – V400 Series

Mechanical

Input Terminals:

14 to 18 AWG

Grille Size/Color:

″ (102 mm)/red or beige

Weight:

.7 lb (317 gm)

Mounting:

Semiflush*:

″ × 4″ × 11/2″–21/8″

standard backbox**

Flush*:

deep backbox (BBD) with

flush mounting plate

Operating

Temperature Range:

° to 120°F (0° to 49°C)

Electrical

Voltage Input:

25 volts or 70.7 volts (nominal)

Frequency Range:

400 – 4000 Hz

*Order mounting plates separately.

**For 12- or 14-gauge wire, a 21/8

″ backbox is recom-

mended.

Engineering Specifications

Speaker shall be a System Sensor Model ______ dual

transformer speaker capable of operating at 25 and 70.7

Vrms. Speaker shall be listed to Underwriter’s Laboratories

Standard 1480 for fire protective signaling systems.

Speaker shall have a frequency range of 400 to 4000 Hz

and shall have an operating temperature between 32

° and

120

°F. Speaker shall have power taps which are selected

by means of a jumper wire(s).

For speaker/strobe combination:

Speaker/strobe shall be a System Sensor Speaker/Strobe

Model ______ dual transformer speaker capable of

operating at 25 and 70.7 Vrms. Speaker/strobe shall be

listed to Underwriter’s Laboratories Standard 1480 for fire

protective signaling systems. Speaker shall have a

frequency range of 400 to 4000 Hz and shall have an

operating temperature between 32

° and 120°F. Speaker

shall have power taps which are selected by means of a

jumper wire(s). Strobe shall be powered independently of

the speaker and shall operate from a 24 VDC or 24 Vrms

full wave rectified unfiltered power supply. Strobe shall

have a light output rating of 15, 75, or 110 candela and

shall be UL 1971 listed as a primary signaling device.

MP-F bảng dữ liệu(PDF) 2 Page - Systemsensor advanced ideas.

MP-F bảng dữ liệu(HTML) 2 Page - Systemsensor advanced ideas.

Html Pages

1 2 3 4

bảng dữ liệu tải về

Link URL