Contents

1

Introduction

......................................................................................................................... 5

1.1

Device and Development Support Tool Nomenclature

.............................................................. 5

1.2

Revision Identification

.................................................................................................... 6

2

Silicon Revision 1.1 Usage Notes and Known Design Exceptions to Functional

Specifications

...................................................................................................................... 7

2.1

Usage Notes for Silicon Revision 1.1

.................................................................................. 7

2.1.1

Possible Emulator Crash If TCK Frequency Is Greater than MXI Frequency

....................... 7

2.1.2

2.1.3

SD/SDIO card: How to Read M bytes (M=1, 2, 3) from SD or SDIO card

............................ 7

2.1.4

SD/SDIO card: How to Handle SDIO interrupt

........................................................... 8

2.1.5

Peripherals: Electrostatic Discharge (ESD) Sensitivity Classification

................................. 8

2.1.6

ASP: Transfers Should be Buffered in Internal Memory

................................................ 9

2.1.7

ASP: Initialization Procedure When External Device is Frame-Sync Master

......................... 9

2.1.8

NAND Layout Assumed by RBL for Big Block NAND Does Not Match NAND Manufacturers'

Recommendations

........................................................................................... 9

2.1.9

GIO0 Low Setting During Device Boot May Cause Boot to Fail

...................................... 10

2.2

Silicon Revision 1.1 Known Design Exceptions to Functional Specifications

................................... 11

Revision History

................................................................................................................. 25

SPRZ287A – July 2008 – Revised October 2008

Table of Contents

3

Submit Documentation Feedback