MPC8640DEC datasheet(77/140 Pages) FREESCALE

tên linh kiện	MPC8640DEC

Giải thích chi tiết về linh kiện	Integrated Host Processor Hardware Specifications

PDF	140 Pages

Scroll/Zoom	100%

nhà sản xuất	FREESCALE [Freescale Semiconductor, Inc]

Trang chủ	http://www.freescale.com

Logo

77 / 140 page

MPC8640 and MPC8640D Integrated Host Processor Hardware Specifications, Rev. 1

Freescale Semiconductor

PCI Express

The eye diagram must be valid for any 250 consecutive UIs.

A recovered TX UI is calculated over 3500 consecutive unit intervals of sample data. The eye diagram is

created using all edges of the 250 consecutive UI in the center of the 3500 UI used for calculating the TX

UI.

NOTE

The reference impedance for return loss measurements is 50

Ω to ground for

both the D+ and D- line (i.e., as measured by a Vector Network Analyzer

with 50

Ω probes—see Figure 52). Note that the series capacitors, CTX, are

optional for the return loss measurement.

Figure 51. Minimum Receiver Eye Timing and Voltage Compliance Specification

14.5.1

Compliance Test and Measurement Load

The AC timing and voltage parameters must be verified at the measurement point, as specified within 0.2

inches of the package pins, into a test/measurement load shown in Figure 52.

NOTE

The allowance of the measurement point to be within 0.2 inches of the

package pins is meant to acknowledge that package/board routing may

benefit from D+ and D– not being exactly matched in length at the package

pin boundary.

MPC8640DEC bảng dữ liệu(PDF) 77 Page - Freescale Semiconductor, Inc