M61311SP/M61316SP

REJ03F0199-0201 Rev.2.01 Mar 31, 2008

Page 11 of 26

ABL1 ABL Control Characteristics1

Measure the amplitude output at OUT (26, 28, 30). The amplitude is called VOUT (26, 28, 30).

The measured value is ABL1.

∆ABL1 ABL Control Relative Characteristics1

Relative characteristics

∆ABL1 is calculated by the equation below:

∆ABL1 = VOUT (26) / VOUT (28),

VOUT (28) / VOUT (30),

VOUT (30) / VOUT (26)

ABL2 ABL Control Characteristics2

Measuring condition and procedure are the same as described in ABL1.

∆ABL2 ABL Control Relative Characteristics2

Measuring condition and procedure are the same as described in

∆ABL1.

ABL3 ABL Control Characteristics3

Measuring condition and procedure are the same as described in ABL1.

∆ABL3 ABL Control Relative Characteristics3

Relative characteristics

∆ABL3 is calculated by the equation below:

∆ABL3 = VOUT (26) − VOUT (28),

VOUT (28)

− VOUT (30),

VOUT (30)

− VOUT (26)

VB1 Brightness Control Characteristics1

Measure the DC voltage at OUT (26, 28, 30). The amplitude is called VOUT (26, 28, 30).

The measured value is called VB1.

∆VB1 Brightness Control Relative Characteristics1

Relative characteristics

∆VB1 is calculated by the equation below:

∆VB1 = VOUT (26) − VOUT (28),

VOUT (28)

− VOUT (30),

VOUT (30)

− VOUT (26)

VB2 Brightness Control Characteristics2

Measuring condition and procedure are the same as described in VB1.

∆VB2 Brightness Control Relative Characteristics2

Measuring condition and procedure are the same as described in

∆VB1.

VB3 Brightness Control Characteristics3

Measuring condition and procedure are the same as described in VB1.

∆VB3 Brightness Control Relative Characteristics3

Measuring condition and procedure are the same as described in

∆VB1.