M38K09RFS datasheet(116/328 Pages) RENESAS

116 / 328 page

FUNCTIONAL DESCRIPTION

Rev.2.00

Oct 05, 2006

page 99 of 112

38K0 Group

REJ09B0337-0200

HARDWARE

Fig. 127 Timing for clear status register

qClear Status Register Command

This command clears the bits (SR3 to SR5) which are set when

the status register operation ends in error. When the “5016” com-

mand code is sent with the 1st byte, the aforementioned bits are

cleared. When the clear status register operation ends, the SRDY

(BUSY) signal changes from “H” to “L” level.

SCLK

RxD

TxD

SRDY (BUSY)

5016

A8 to

A15

A16 to

A23

4116

data0

data255

SCLK

RxD

TxD

SRDY (BUSY)

qPage Program Command

This command writes the specified page (256 bytes) in the flash

memory sequentially one byte at a time. Execute the page pro-

gram command as explained here following.

(1) Transfer the “4116” command code with the 1st byte.

(2) Transfer addresses A8 to A15 and A16 to A23 with the 2nd and

3rd bytes respectively.

(3) From the 4th byte onward, as write data (D0 to D7) for the

page (256 bytes) specified with addresses A8 to A23 is input

sequentially from the smallest address first, that page is auto-

matically written.

When reception setup for the next 256 bytes ends, the SRDY

(BUSY) signal changes from “H” to “L” level. The result of the

page program can be known by reading the status register. For

more information, see the section on the status register.

Fig. 128 Timing for page program

M38K09RFS bảng dữ liệu(PDF) 116 Page - Renesas Technology Corp

M38K09RFS bảng dữ liệu(HTML) 116 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL