công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

H8S/2111B bảng dữ liệu(PDF) 509 Page - Renesas Technology Corp

tên linh kiện H8S/2111B
Giải thích chi tiết về linh kiện  16-Bit Single-Chip Microcomputer
PDF  582 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  RENESAS [Renesas Technology Corp]
Trang chủ  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8S/2111B bảng dữ liệu(HTML) 509 Page - Renesas Technology Corp

Back Button H8S/2111B Datasheet HTML 505Page - Renesas Technology Corp H8S/2111B Datasheet HTML 506Page - Renesas Technology Corp H8S/2111B Datasheet HTML 507Page - Renesas Technology Corp H8S/2111B Datasheet HTML 508Page - Renesas Technology Corp H8S/2111B Datasheet HTML 509Page - Renesas Technology Corp H8S/2111B Datasheet HTML 510Page - Renesas Technology Corp H8S/2111B Datasheet HTML 511Page - Renesas Technology Corp H8S/2111B Datasheet HTML 512Page - Renesas Technology Corp H8S/2111B Datasheet HTML 513Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 509 / 582 page
background image
Rev. 1.00, 05/04, page 475 of 544
20.8
Subsleep Mode
The CPU makes a transition to subsleep mode when the SLEEP instruction is executed in
subactive mode with the SSBY bit in SBYCR cleared to 0, the LSON bit in LPWRCR set to 1,
and the PSS bit in TCSR (WDT_1) set to 1.
In subsleep mode, the CPU is stopped. Peripheral modules other than TMR_0, TMR_1, WDT_0,
and WDT_1 are also stopped. The contents of the CPU's internal registers, several on-chip
peripheral module registers, and on-chip RAM data are retained and the I/O ports retain their
values before transition as long as the prescribed voltage is supplied.
Subsleep mode is exited by an interrupt (interrupts by on-chip peripheral modules, NMI, IRQ0 to
IRQ7), the
RES pin input, or the STBY pin input.
When an interrupt occurs, subsleep mode is exited and interrupt exception handling starts.
In the case of an IRQ0 to IRQ7 interrupt, subsleep mode is not exited if the corresponding enable
bit has been cleared to 0. In the case of interrupts from the on-chip peripheral modules, subsleep
mode is not exited if the interrupt enable register has been set to disable the reception of that
interrupt, or the interrupt is masked by the CPU.
When the
RES pin is driven low, system clock oscillation starts. Simultaneously with the start of
system clock oscillation, the system clock is supplied to the entire LSI. Note that the
RES pin must
be held low until clock oscillation is stabilized. If the
RES pin is driven high after the clock
oscillation stabilization time has passed, the CPU begins reset exception handling.
If the
STBY pin is driven low, the LSI enters hardware standby mode.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com