công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

H8/3028F bảng dữ liệu(PDF) 622 Page - Renesas Technology Corp

tên linh kiện H8/3028F
Giải thích chi tiết về linh kiện  Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series
PDF  923 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  RENESAS [Renesas Technology Corp]
Trang chủ  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8/3028F bảng dữ liệu(HTML) 622 Page - Renesas Technology Corp

Back Button H8/3028F Datasheet HTML 618Page - Renesas Technology Corp H8/3028F Datasheet HTML 619Page - Renesas Technology Corp H8/3028F Datasheet HTML 620Page - Renesas Technology Corp H8/3028F Datasheet HTML 621Page - Renesas Technology Corp H8/3028F Datasheet HTML 622Page - Renesas Technology Corp H8/3028F Datasheet HTML 623Page - Renesas Technology Corp H8/3028F Datasheet HTML 624Page - Renesas Technology Corp H8/3028F Datasheet HTML 625Page - Renesas Technology Corp H8/3028F Datasheet HTML 626Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 622 / 923 page
background image
Rev. 2.00, 09/03, page 592 of 890
18.5.1
Boot Mode
When boot mode is used, a flash memory programming control program must be prepared
beforehand in the host, and SCI channel 1, which is to be used, must be set to asynchronous mode.
When a reset-start is executed after setting the H8/3028F-ZTAT’ pins to boot mode, the boot
program already incorporated in the MCU is activated, and the programming control program
prepared beforehand in the host is transmitted sequentially to the H8/3028F-ZTAT, using the SCI.
In the H8/3028F-ZTAT, the programming control program received via the SCI is written into the
programming control program area in on-chip RAM. After the transfer is completed, control
branches to the start address (H'FFC720) of the programming control program area and the
programming control program execution state is entered (flash memory programming/erasing can
be performed).
Figure 18.5 shows a system configuration diagram when using boot mode, and figure 18.6 shows
the boot program mode execution procedure.
RxD1
TxD1
SCI1
H8/3028F-ZTAT
Flash memory
Reception of programming data
Transmission of verify data
Host
On-chip RAM
Figure 18.5 System Configuration When Using Boot Mode



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com