công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

H8/3028F bảng dữ liệu(PDF) 621 Page - Renesas Technology Corp

tên linh kiện H8/3028F
Giải thích chi tiết về linh kiện  Renesas 16-Bit Single-Chip Microcomputer H8 Family/H8/300H Series
PDF  923 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  RENESAS [Renesas Technology Corp]
Trang chủ  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8/3028F bảng dữ liệu(HTML) 621 Page - Renesas Technology Corp

Back Button H8/3028F Datasheet HTML 617Page - Renesas Technology Corp H8/3028F Datasheet HTML 618Page - Renesas Technology Corp H8/3028F Datasheet HTML 619Page - Renesas Technology Corp H8/3028F Datasheet HTML 620Page - Renesas Technology Corp H8/3028F Datasheet HTML 621Page - Renesas Technology Corp H8/3028F Datasheet HTML 622Page - Renesas Technology Corp H8/3028F Datasheet HTML 623Page - Renesas Technology Corp H8/3028F Datasheet HTML 624Page - Renesas Technology Corp H8/3028F Datasheet HTML 625Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 621 / 923 page
background image
Rev. 2.00, 09/03, page 591 of 890
18.5
On-Board Programming Mode
When pins are set to on-board programming mode and a reset-start is executed, the chip enters the
on-board programming state in which on-chip flash memory programming, erasing, and verifying
can be carried out. There are two operating modes in this mode—boot mode and user program
mode. The pin settings for entering each mode are shown in table 18.6. For a diagram of the
transitions to the various flash memory modes, see figure 18.2.
Boot mode and user program mode cannot be used in the H8/3028F-ZTAT’s mode 6 (on-chip
ROM enabled).
Table 18.6 On-Board Programming Mode Settings
Mode
FWE
MD2
MD1
MD0
Boot mode
Mode 5
1*
1
0*
2
01
Mode 7
0*
2
11
User program mode
Mode 5
1
0
1
Mode 7
1
1
1
Notes: 1. For the High level input timing, see items 6 and 7 of Notes on Use of Boot Mode.
2. In boot mode, the MD2 setting should be the inverse of the input.
In the boot mode in the H8/3028F-ZTAT, the levels of the mode pins (MD2 to MD0) are
reflected in mode select bits 2 to 0 (MDS2 to MDS0) in the mode control register
(MDCR).



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com