công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

H8S/2114R bảng dữ liệu(PDF) 206 Page - Renesas Technology Corp

tên linh kiện H8S/2114R
Giải thích chi tiết về linh kiện  Renesas 16-Bit Single-Chip Microcomputer H8S Family / H8S/2100 Series
PDF  1038 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  RENESAS [Renesas Technology Corp]
Trang chủ  http://www.renesas.com
Logo RENESAS - Renesas Technology Corp

H8S/2114R bảng dữ liệu(HTML) 206 Page - Renesas Technology Corp

Back Button H8S/2114R Datasheet HTML 202Page - Renesas Technology Corp H8S/2114R Datasheet HTML 203Page - Renesas Technology Corp H8S/2114R Datasheet HTML 204Page - Renesas Technology Corp H8S/2114R Datasheet HTML 205Page - Renesas Technology Corp H8S/2114R Datasheet HTML 206Page - Renesas Technology Corp H8S/2114R Datasheet HTML 207Page - Renesas Technology Corp H8S/2114R Datasheet HTML 208Page - Renesas Technology Corp H8S/2114R Datasheet HTML 209Page - Renesas Technology Corp H8S/2114R Datasheet HTML 210Page - Renesas Technology Corp Next Button
Zoom Inzoom in Zoom Outzoom out
 206 / 1038 page
background image
Section 7 Data Transfer Controller (DTC)
Rev. 3.00 Jul. 14, 2005 Page 158 of 986
REJ09B0098-0300
7.8
Usage Notes
7.8.1
Module Stop Mode Setting
DTC operation can be enabled or disabled by the module stop control register (MSTPCR). In the
initial state, DTC operation is enabled. Access to DTC registers is disabled when module stop
mode is set. Note that when the DTC is being activated, module stop mode can not be specified.
For details, see section 24, Power-Down Modes.
7.8.2
On-Chip RAM
MRA, MRB, SAR, DAR, CRA, and CRB are all located in on-chip RAM. When the DTC is used,
the RAME bit in SYSCR should not be cleared to 0.
7.8.3
DTCE Bit Setting
For DTCE bit setting, use bit manipulation instructions such as BSET and BCLR, for reading and
writing. Multiple DTC activation sources can be set at one time (only at the initial setting) by
masking all interrupts and writing data after executing a dummy read on the relevant register.
7.8.4
Setting Required on Entering Subactive Mode or Watch Mode
Set the MSTP14 bit in MSTPCRH to 1 to make the DTC enter module stop mode, then confirm
that is set to 1 before making a transition to subactive mode or watch mode.
7.8.5
DTC Activation by Interrupt Sources of SCI, IIC, LPC, or A/D Converter
Interrupt sources of the SCI, IIC, LPC, or A/D converter which activate the DTC are cleared when
DTC reads from or writes to the respective registers, and they cannot be cleared by the DISEL bit
in MRB.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100  ...More


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com