| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
H8S/20103 bảng dữ liệu(PDF) 218 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
H8S/20103 bảng dữ liệu(HTML) 218 Page - Renesas Technology Corp |
|
218 / 992 page ![]() Section 7 ROM Rev. 1.00 Oct. 03, 2008 Page 192 of 962 REJ09B0465-0100 (j) New Bit-Rate Selection In response to the command for new bit-rate selection, the boot program changes the bit rate settings to those of the specified one, and responds to the acknowledgement from the host at the new bit rate. The new bit-rate selection command should be transmitted after the clock-mode selection command. Command H'3F Size Bit rate Input frequency Number of frequency division ratio types Frequency division ratio 1 Frequency division ratio 2 SUM • Command H'3F (1 byte): New bit-rate selection • Size (1 byte): The total size of the bit-rate, input-frequency, number-of-frequency-division- ratio-types, and frequency-division-ratio fields. • Bit rate (2 bytes): New bit rate The value to be set here is obtained by dividing the desired bit rate by 100. (For example, to select the bit rate of 19200 bps, 19200 is divided by 100 to be 192, and so H'00C0 should be set.) • Input frequency (2 bytes): The frequency of the clock input to the boot program. The value to be set here is obtained by multiplying the input frequency (MHz; to the second decimal place) by 100. (For example, to select the input frequency of 20.00 MHz, 20.00 is multiplied by 100 to be 2000, and so H'07D0 should be set.) • Number of frequency division ratio types (1 byte): The number of selectable frequency division ratios for the device. (The value is usually H'02 because the main and peripheral module operating frequencies can be usually selected.) • Frequency division ratio 1 (1 byte): Frequency division ratio for the main operating frequency. The negative numerical value by which the frequency is divided. (Example: H'FE (-2) when the frequency is divided by two.) • Frequency division ratio 2 (1 byte): Frequency division ratio for the peripheral operating frequency. The negative numerical value by which the frequency is divided. (Example: H'FE (-2) when the frequency is divided by two.) |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |