*All brand names and product names are trademarks or registered trademarks of their respective companies.

Function

The PCA7750G02-BARE is a converter board that converts an

80-pin 0.8mm-pitch QFP (80P6N-A) or LCC (80D0) to the standard

pitch. Pin No. 1 corresponds to pin No. 1.

Application

Use the PCA7750G02-BARE as a test board to connect an 80P6N-A

or 80D0 MCU package to a standard pitch universal board. Since the

PCA7750G02-BARE has a flat mounting pattern, users can mount a

PROM MCU directly on it. An 80-pin LCC socket made by

Yamaichi Electronics Co., Ltd. is required, when an MCU package is

80D0.

Dimensions

70.0(D)×64.0(W)mm

(L)=50.8(2.54×20)mm

Pin Layout

Manufactured Product

For 80D0: PCA7750G02

[Ordering Information] See Appendix H "Ordering Information".

PCA7750G02-BARE

Converter board from 80-pin 0.8mm-pitch QFP ( 80P6N-A) or LCC

(80D0) to 40-pin DIL Standard Pitch

Foot Pattern Reference Dimensions

* When using the AXS4803M19 made by Matsushita Electric Works, Ltd.,

note that the contacts of the IC socket proper touch the PC board in the

shaded section. Therefore, be especially careful with pattern wiring to

ensure that other pins will not be shorted. (Through holes are not

accepted.)

* Only when using the AXS4803M19 made by Matsushita Electric Works,

Ltd., be sure to create foot patterns for the holding metal fixtures in four

locations

.