*All brand names and product names are trademarks or registered trademarks of their respective companies.

Function

The PCA7752AG02-BARE is a converter board that converts a

100-pin 0.65mm-pitch QFP (100P6S-A) or LCC (100D0) to the

standard pitch. Pin No. 1 corresponds to pin No. 1.

Application

Use the PCA7752AG02-BARE as a test board to connect a

100P6S-A or 100D0 MCU package to a standard pitch universal

board. Since the PCA7752A-BARE has a flat mounting pattern,

users can mount a PROM MCU directly on it. A 100-pin LCC socket

made by Yamaichi Electronics Co., Ltd. is required, when an MCU

package is 100D0.

Dimensions

70.0(D)×64.0(W)mm

(L)=50.8(2.54×20)mm

Pin Layout

Manufactured Product

For 100P6S-A: PCA7752B

For 100D0: PCA7752AG02

[Ordering Information] See Appendix H "Ordering Information".

PCA7752AG02-BARE

Converter board from 100-pin 0.65mm-pitch QFP (100P6S-A) or LCC

(100D0) to 50-pin DIL Standard Pitch

Foot Pattern Reference Dimensions

* When using the AXS4003M295C made by Matsushita Electric Works, Ltd.,

note that the contacts of the IC socket proper touch the PC board in the

shaded section. Therefore, be especially careful with pattern wiring to ensure

that other pins will not be shorted. (Through holes are not accepted.)

* Only when using the AXS4003M295C made by Matsushita Electric Works,

Ltd. and IC61-1004-051 made by Yamaichi Electronics Co., Ltd., be sure to

create foot patterns for the holding metal fixtures in four locations.