Freescale Semiconductor, Inc. reserves the right to change the detail specifications,

as may be required, to permit improvements in the design of its products.

Document Number: MPC17511A

Rev. 5.0, 9/2008

Freescale Semiconductor

Technical Data

© Freescale Semiconductor, Inc., 2008. All rights reserved.

1.0 A 6.8 V H-Bridge Motor

Driver IC

The 17511A is a monolithic H-Bridge designed to be used in

portable electronic applications to control small DC motors or bipolar

step motors. End applications include head positioners (CDROM or

disk drive), camera focus motors, and camera shutter solenoids.

The 17511A can operate efficiently with supply voltages as low as

(0.46

Ω typical) can provide continuos motor drive currents of 1.0A

and handle peak currents up to 3.0A. It is easily interfaced to low-cost

MCUs via parallel 3.0V- or 5.0V- compatible logic. The device can be

pulse width modulated (PWM-ed) at up to 200 kHz.

This device contains an integrated charge pump and level shifter

(for gate drive voltages), integrated shoot-through current protection

(cross-conduction suppression logic and timing), and undervoltage

detection and shutdown circuitry.

The 17511A has four operating modes: Forward, Reverse, Brake,

and Tri-Stated (High Impedance).

Features

• 2.0V to 6.8V Continuous Operation

• Output Current 1.0 A(DC), 3.0A (Peak)

• MOSFETs < 600 m

• 3.0V/5.0V TTL-/CMOS-Compatible Inputs

• PWM Frequencies up to 200 kHz

• Undervoltage Shutdown

• Cross-Conduction Suppression

• Low Power Consumption

• Pb-Free Packaging Designated by Suffix Codes EV and EP

Figure 1. 17511A Simplified Application Diagram

H-BRIDGE MOTOR DRIVER IC

EV SUFFIX (PB-FREE)

98ASA10614D

16-PIN VMFP

17511A

ORDERING INFORMATION

Device

Temperature

Package

MPC17511AEV

-20°C to 65°C

16 VMFP

MPC17511AEV/EL

MPC17511AEP

24 QFN

MPC17511AEP/R2

EP SUFFIX (PB-FREE)

98ARL10577D

24-PIN QFN

VDD

C1L

C1H

C2L

C2H

CRES

EN

GIN

IN1

IN2

GND

VM

GOUT

OUT1

OUT2

5.0V

17511A

MCU

Motor

5.0V