| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MIC5014 bảng dữ liệu(PDF) 1 Page - Micrel Semiconductor |
|
|
|||||||||||||||||||||||||||||
MIC5014 bảng dữ liệu(HTML) 1 Page - Micrel Semiconductor |
|
1 / 12 page ![]() MIC5014/5015 Micrel, Inc. June 2005 1 MIC5014/5015 Features • 2.75V to 30V operation • 100µA maximum supply current (5V supply) •15µA typical off-state current • Internal charge pump • TTL compatible input •Withstands 60V transient (load dump) •Reverse battery protected to –20V • Inductive spike protected to –20V •Overvoltage shutdown at 35V • Internal 15V gate protection •Minimum external parts •Operates in high-side or low-side configurations •1µA control input pull-off • Inverting and noninverting versions Applications •Automotive electrical load control •Battery-powered computer power management • Lamp control •Heater control •Motor control •Power bus switching General Description MIC5014 and MIC5015 MOSFET drivers are designed for gate control of N-channel, enhancement-mode, power MOSFETs used as high-side or low-side switches. The MIC5014/5 can sustain an on-state output indefinitely. The MIC5014/5 operates from a 2.75V to 30V supply. In high- side configurations, the driver can control MOSFETs that switch loads of up to 30V. In low-side configurations, with separate supplies, the maximum switched voltage is limited only by the MOSFET. The MIC5014/5 has a TTL compatible control input. The MIC5014 is noninverting while the MIC5015 is inverting. The MIC5014/5 features an internal charge pump that can sustain a gate voltage greater than the available supply voltage. The driver is capable of turning on a logic-level MOSFET from a 2.75V supply or a standard MOSFET from a 5V supply. The gate-to-source output voltage is internally limited to approximately 15V. The MIC5014/5 is protected against automotive load dump, reversed battery, and inductive load spikes of –20V. The driver’s overvoltage shutdown feature turns off the exter- nal MOSFET at approximately 35V to protect the load against power supply excursions. The MIC5014 is an improved pin-for-pin compatible replace- ment in many MIC5011 applications. The MIC5014/5 is available in plastic 8-pin DIP and 8-pin SOIC pacakges. MIC5014/5015 Low-Cost High- or Low-Side MOSFET Driver Micrel, Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel + 1 (408) 944-0800 • fax + 1 (408) 474-1000 • http://www.micrel.com MIC5014 Control Input OFF ON 1 2 3 4 8 7 6 5 IRLZ24 +3V to +4V NC Gate Gnd Source Input V+ NC NC 10µF Figure 1. 3V “Sleep-Mode” Switch with a Logic-Level MOSFET Typical Application |
Số phần tương tự - MIC5014 |
|
Mô tả tương tự - MIC5014 |
|
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |