| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
T410 bảng dữ liệu(PDF) 33 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
T410 bảng dữ liệu(HTML) 33 Page - STMicroelectronics |
|
33 / 84 page ![]() ST52T410/ST52T420/E420 33/84 4.6 Interrupts and Low power mode All interrupts allow the processor to leave the WAIT low power mode. Only the external Interrupt allows the processor to leave the HALT low power mode. 4.7 Interrupt RESET An eventually pending interrupt can be reset with the instruction RINT j, which resets the interrupt j-th where j identifies the peripherals as described in thefollowing table(seeTable4.4). The assembler instruction: RINT 2 Resets the PWM/Timer 1 interrupt. Note: The RINT command must be preceded from a UDGI (or MDGI) command and followed by a UEGI (or MEGI) command. WARNING: If an interrupt is reset, with the RINT instruction within its own interrupt routine, the priority level of the interrupt becomes the lowest and the routine can be immediately interrupted by a lower priority interrupt request. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |