| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
2108-BT/TV2M bảng dữ liệu(PDF) 2 Page - pro-elec |
|
|
|||||||||||||||||||||||||||||
2108-BT/TV2M bảng dữ liệu(HTML) 2 Page - pro-elec |
|
2 / 2 page ![]() Extension Leads Page <2> 22/10/11 V1.1 Important Notice : This data sheet and its contents (the "Information") belong to the members of the Premier Farnell group of companies (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. pro - ELEC is the registered trademark of the Group. © Premier Farnell plc 2011. Safety Specifications: Item Conditions Requirements Appearance - No defect such as cracks, deep scratches or blemishes Marking - Shall be legible and must be clear Insulation resistance 500 + 250 V dc for 1 minute Shall not be less than 5 M Ω Dielectric strength 2,000 ±60 V for 1 minute No damage or breakdown Resistance to aging 70° ±5° (168 hrs.) No cracks or become sticky Construction 20° ±5° Complied with figure 11, 12, 14 and 16 gauge Torque test Value of 0.6 Nm (6.1 kgf / cm) Terminal, cord grip and cover screws shall withstand the torque applied Glow wire test 650° / 750° electrically heated Flame must extinguish within 30 s Temperature rise 14 A, 250 V Temperature rise must not exceed: 1. Terminals or terminations : 52 K 2. Accessible surface : 52 K Make and break test of switch 13 A, 250 V (15,000 times) Voltage drop across each switched pole shall not exceed 75 mV Cord anchorage test 1. 3 kg Pull force test for 0.5mm2 cable 2. 6 kg Pull force test for 1 mm2 or above cable The flexible cord shall not be displaced by more than 2 mm after being pull 25 times Drop test Fit with 3 G1.25 mm2 cable, 2.25 m and drop at a height of 0.4 m above the floor. No external damage which might affect safety and no components shall have become detached Live parts accessibility Subjected to 1 mm test probe with applied force of 5 N when they are mounted and wired as in normal use Live parts of socket shall not be accessible Specification Table Description Type Part Number Extension Lead, 4 Gang, Switched, 2M Rewireable 2188RFI-2M Extension Lead, 6 Gang, Switched, 2M 2189RFI-2M Extension Lead, 6 Gang, Switched, 2M 2108-BT/TV2M www.farnell.com www.cpc.co.uk |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |